In electric mode, the car is said to be capable of 28 miles (WLTP) before the petrol engine is required to provide drive. It certainly leaves the Outlander PHEV feeling far more advanced, in terms of powertrain, than conventional cars in this segment.
The engine acts mostly as a top-up for battery power and kicks into life seamlessly when required. It's larger than the old car’s 2.0-litre unit because it runs on the more efficient Atkinson cycle, which leaves it with a lower bhp-per-litre ratio; by growing by close to 400cc, it can now provide more performance while offering enhanced economy, although the stats (141mpg and 46g/km of CO2 emissions) are slightly hampered by the switch to the WLTP test, so don’t reflect this on paper.
The extra performance is obvious both in pure electric and hybrid modes, with quicker throttle response and more eager rolling acceleration. With a 0-62mph time of 10.5sec, the Outlander PHEV is by no means fast, but it possesses the linear shove of an EV that makes overtaking and pulling out of junctions feel effortless. Plus, top speed in electric mode has increased from 78mph to 84mph.
Mitsubishi has used more adhesives in the Outlander PHEV's structure to create a more rigid body-in-white, and it has tweaked the car’s steering and suspension to enhance ride comfort. While a back-to-back drive in the original and updated car showed that the differences are small, they are quite noticeable on certain surfaces. Vibrations through the body have reduced and the car deals with cracks and ridges in the road more confidently, swapping thuds for a more rubberised reaction through the suspension.
The steering is also slightly more responsive in order to make it easier to guide this large SUV through lanes and require less input to navigate through tight urban streets. That being said, there’s nothing in the way of steering feel, and the car rides like a proper SUV, in contrast to other high-riding models like the Skoda Kodiaq, which are more planted on the road. But the Outlander PHEV feels more rugged, which Mitsubishi believes is important to appeal to its traditional buyers, many of whom are said to value good off-road capability.
The response from these existing buyers has also encouraged the introduction of Sport and Snow modes, which can be activated via the aforementioned new toggle switch. In Sport, the engine is called into action permanently, providing input to front-wheel drive for maximum performance. Snow adjusts the driveline, which can juggle torque front and rear, with 0-100% available from each axle, into its most sensitive mode. Torque between sides is automatically controlled using the brakes, providing a form of torque vectoring on slippery surfaces.